Same day shipping on orders placed before 3pm
02 6331 1961

The 4wd Zone Bullbar Indicator/Parker LED Indicator/Park Lights and Infill Plates - Black - Pair

LED Indicator/Park Light Assembly with infill plate to suit Toyota and Nissan factory bullbars.
$139.95
Availability: In stock (3)

Earlier Toyota and Nissan factory alloy bullbars have the plastic housing and inset indicator/park lights. These plastic housings and park lights are discontinued and there are very few options for a replacement indicator/park light.

 

Universal indicator/park light assemblies are too short and do not fit in the hole in the bar. We've designed an infill plate to house the universal LED indicator/park light assemblies that fits in the bullbar and fills the gaps around the light.

 

Fitment is easy and requires two holes to be drilled in the bar either side of the hole. The infill plates are made from 2mm steel and powedercoated satin black for rust protection. All hardware including 4 black phillips head bolts, washers and nuts are supplied. The plug for the factory indicator assembly will most likely need to be removed and the tail with new plug (supplied with the lights) soldered or crimped on to connect the new lights. A small amount of the bar near the bolts holding the light to the infill plate may need to be filed out to provide clearance.

 

Dimensions:

  • Length - 270mm
  • Width - 70mm
  • Thickness - 2mm
  • Bolt Hole Centre Measurements
    • Bar Mounting Bolts - 250mm
    • Light Mounting Bolts - 210mm
0 stars based on 0 reviews
. . . . .